Skip to Content

Midi file

6 replies [Last post]
dref
Offline
Joined: 04/17/2010

Hello. I use Hydrogen 0.9.6\ I would like to know if I could connect the release of Seq24 towards Hydrogen. The purpose of the operation is to read a MIDI file in Seq24, and to use an instrument of Hydrogen (Seq24 reads MIDI messages and Hydrogen is the audio source).
Thank you for answering.

mauser
Offline
Joined: 03/30/2010

Hi,

that depends on how seq24 works (i don't know the program). Hydrogen is able to operate on midi input, so if seq24 offers a midi out you can connect that to the midi in of hydrogen and everything should work.

dref
Offline
Joined: 04/17/2010

Hello. Thank you for the message. My problem is that I do not manage to parametrize the "qjackctl" under Windows. Is there a tutoriel for param?ter this application?

mauser
Offline
Joined: 03/30/2010

How about this? https://help.ubuntu.com/community/HowToQjackCtlConnections
The workflow is the same as on linux..

dref
Offline
Joined: 04/17/2010

Hello. Thank you for the message. My problem is the following one: when I am in the window connections - audio Jack, nothing displays (either in the audio section, or in the section MIDI .J' try to send MIDI information of Seq24 to Hydrogen. On the other hand in Hydrogen, I cannot select " Jack" in the Preferences because an error message displays: " Erreur au lancement du pilote audio". Do you understand anything?
Thank you for helping me.

wolke
wolke's picture
Offline
Joined: 03/30/2010

you cannot see any connections if you have not started the jack audiodriver.

after open qjackctl you have to make all settings. after this you must start the driver by pressing the start button. if the driver start successfully you can see connections and hydrogen allow to use the jack driver.

dref
Offline
Joined: 04/17/2010

Hello. I thank you for your message. I went on the "setup". My problem is that I do not know what I have to choose in "Interface" (I have a sound card Waveterminal 192L), and to "Server Path". It is necessary to choose " hw:0 and " jackdmp "? If I choose the previous options and what I click "Messages", the following messages ' post: 18:58:27.531 Patchbay deactivated.
18:58:27.562 Statistics reset.
18:58:27.593 Customer activated.
18:58:27.812 JACK connection changes.
I think that there is a problem.
Thank you for answering me.